ABK In-Line Motor

CODE: GABK-B

[Contact us for a price]

The In-line motor is designed to fit in the ceiling space (see fig I) or built into the top of the extractor. The diagram below shows how the motor can be mounted when the only solution is to route the ducting horizontally to the outside.

Figure I shows a seperate motor mounted under a false ceiling or in an existing void, the air then flows through the motor and out to a small grate on the outside. Alternatively the motor can be integrated into the top of the extractor with a small increase in the height of the unit, it then only requires ducting and a grate on the outside.

Illustration showing the route from an extractor through the In-line motor :-

 

The external motor is availble in various output capacity's to suite every need.

GABK146BHR (extra flat)
High performance 755m³/hr motor
Inlet/outlet 220x90mm square duct or 150mm round duct
Galvanised steel housing
Rated 200w load
1.5m cable
Can be fitted to wall, ceiling or floor

GABK225BHR
Specification as above but with 1060m/hr 355w rated motor

GABK146B
High performance 755m³/hr motor
Inlet/outlet 220x90mm square duct or 150mm round duct
Galvanised steel housing
Rated 200w load
1.5m cable
Can be fitted to wall, ceiling or floor

GABK225B
Specification as above but with 1060m/hr 355w rated motor

GABK230B (extra quiet)
Specification as above but with 1070m/hr 355w rated motor
Inlet/outlet 200mm round duct

GABK260B
Specification as above but with 1495m/hr motor






 

ABK
None
Loading...